[Toulibre] scanner choix

[momo]

Le 11/02/2014 11:09, Walter Oswald a écrit :
> Epson V33 fonctionne très bien sous fedora
> va faire pareil sous Debian certainement
> saluts WO
>

je viens d'installer un scanner epson v33, mais je n'aarive pas à le 
faire reconnaître

je vois qu'il est là, mais comment le faire fonctionner ??

# sane-find-scanner

   # sane-find-scanner will now attempt to detect your scanner. If the
   # result is different from what you expected, first make sure your
   # scanner is powered up and properly connected to your computer.

   # No SCSI scanners found. If you expected something different, make 
sure that
   # you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x04b8 [EPSON], product=0x0142 [EPSON 
Perfection V33/V330]) at libusb:001:006
   # Your USB scanner was (probably) detected. It may or may not be 
supported by
   # SANE. Try scanimage -L and read the backend's manpage.

   # Not checking for parallel port scanners.

   # Most Scanners connected to the parallel port or other proprietary ports
   # can't be detected by this program.

/home/momo# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 006: ID 04b8:0142 Seiko Epson Corp.
Bus 001 Device 004: ID 058f:6364 Alcor Micro Corp. AU6477 Card Reader 
Controller
Bus 002 Device 003: ID 1c4f:0034 SiGma Micro
Bus 002 Device 004: ID 413c:2003 Dell Computer Corp. Keyboard




-- 
_______
momo :a)
------------------------------
http://www.fractuscontrarius.fr
http://photographia.fractuscontrarius.fr
http://cras31.info/
-----------------------------
GNU/Linux/debian-wheezy  3.2.0-4-amd64